KOVING S.R.O

products

FLOOR STEEL GRATINGS

Floor steel gratings form the basic structural elements of work platforms and communication routes in building structures and technological equipment. We are happy to produce gratings for you in various material designs and for all purposes of use - welded SP gratings, pressed P gratings, anti-slip gratings, plastic gratings, as well as various more special gratings.

Pressed P gratings

Pressed (P) gratings - according to DIN 24537 - are produced by pressing transverse non-bearing strips under high pressure into pre-punched slots in the supporting strips. The gratings are then framed by a edging profile and usually hot-dip galvanized. Pressed (P) gratings are more beautiful than welded gratings, which is why they often help with environmental and aesthetic solutions of metropolitan architecture and landscape design. For example, a pressed (P) grate can be used in squares, parks, can protect tree roots, increase the pedestrian area of the park, does not prevent the sun, air, water or snow. We produce pressed (P) gratings in standard dimensions or exactly to measure according to your requirements.

Surface treatment: hot-dip zinc, coloring, without surface treatment.
Material: steel, aluminum, stainless steel

Construction of pressed floor steel gratings - type P

P-type steel floor gratings are made of three main elements:

1. bearing bar, which is:

a) flat steel with dimensions (height x thickness) according to the following table:

tape thickness 2 mm | 25 x 2 | 30 x 2 | 35 x 2 | 40 x 2 | 50 x 2
tape thickness 3 mm | 25 x 3 | 30 x 3 | 35 x 3 | 40 x 3 | 50 x 3 | 60 x 3 | 70 x 3
tape thickness 4 mm | 30 x 4 | 35 x 4 | 40 x 4 | 50 x 4 | 60 x 4 | 70 x 4
tape thickness 5 mm | 40 x 5 | 50 x 5 | 60 x 5 | 70 x 5 | 80 x 5 | 90 x 5| 100 x 5

b) flat steel in anti-slip design (see anti-slip gratings), which is used in places where there is a risk of injury due to slipping, icing, oils, etc.

2. non-bearing bar of dimensions:

8×1,5 mm with a 2 mm thick carrier strip
10×2 mm for a 3 mm thick carrier strip
12×3 mm for a 4 mm thick carrier strip
15×4 mm for a 5 mm thick carrier strip

3. edging tape / profilewhich is standard on the dimensions of the carrier tape.

There is also the possibility of a different size and profile by mutual agreement with our employees.

Mesh sizes for pressed steel floor gratings - type P

"P" grates are manufactured in the basic types of mesh:
from 11 x 11, 11 x 22, 11 x 33, 11 x 44, 11 x 55, 11 x 66, 22 x 11, …… 99 x 99 mm.
The standard modules for "P" gratings are multiples of 11 in both directions.

Príslušenstvo

Technické údaje a taulky